VIRGINIA-WIDE CHILLER BUYING / WE BUY. NEVER SELL.
Industrial chiller equipment
Virginia chiller buyers · 20 to 2,000+ tons

We Buy Used 50–99 Ton Chillers in Leesburg, Virginia

Cash offers for surplus chillers. We handle the crane, rigging, refrigerant recovery, loading and freight—so you can move on.

We buy chillers. We never sell them.
↗Payments Upfront
↗No Testing
↗We Cover All Freight
↗All Tonnages Bought
Owner-supplied photograph of industrial chiller equipment
Real equipment. Real experience.Virginia-wide buying
What we buy

Your chiller.
Our heavy lifting.

Have an industrial chiller coming out of a facility? We make the process straightforward: tell us what you have, and we’ll handle the logistics.

We buy water-cooled and air-cooled units, including centrifugal, screw and scroll chillers. From data centers and power plants to hospitals, campuses and industrial plants, we consider surplus equipment in all tonnages and refrigerants.

  • Cash offers
  • Payments upfront
  • No seller testing
  • All freight covered
A simple process

From nameplate
to pickup.

One point of contact for the equipment and the work it takes to move it.

01 /

Share the details

Send the nameplate and a few photos, or tell us what you know about the chiller and its location.

02 /

Get a cash offer

We review your equipment and discuss an offer. We pay upfront, and you don’t need to test the chiller for us.

03 /

We handle removal

We arrange disconnects, refrigerant recovery, cranes, rigging, loading, freight and hauling.

Chiller buying guide

We Buy Used 50–99 Ton Chillers in Leesburg, Virginia

A practical buyer for your existing chiller

If you have used 50–99-ton chillers to remove in Leesburg, Virginia, we buy used chillers rather than selling equipment. The machine can be running, idle, disconnected, or not operating. Tell us what you know about its condition; you do not need to test, start, repair, or certify it for us before making an inquiry. We review each opportunity on its own equipment, access, and proposed scope.

Our service covers Virginia facilities and all chiller types, tonnages, and refrigerants. We consider equipment from below 20 tons through 2,000 tons and above, including centrifugal, screw, scroll, air-cooled, and water-cooled designs. The category on this page helps you find relevant information; it does not restrict the equipment you can submit.

Understanding 50–99 tons of cooling capacity

For a project in Leesburg, Virginia, the location of the machine and the operating needs of the property matter. For a commercial or institutional property with a shared lot, ask which areas can be used for equipment loading. We can review the available route and discuss any needed lifting equipment.

A 50–99 ton unit can have different compressor arrangements, footprints, and refrigerants. The nameplate capacity and equipment dimensions help distinguish the cooling rating from the physical size and handling requirements.

A refrigeration ton is a measure of cooling capacity, not the physical weight of the machine. If the capacity is uncertain, a model or serial number may help us investigate it; do not estimate a freight weight from the tonnage rating.

Information that helps us review the unit

Start with the location in Leesburg, Virginia, the manufacturer and model if known, the nominal cooling capacity, and the current status. A readable nameplate photo, an overall equipment photo, and a view of the surrounding space are useful. If the rating, model, refrigerant, or service history is unknown, say so rather than guessing.

Also tell us whether the equipment is indoors or outdoors, still connected, already isolated, or missing any major parts. Let us know if more than one chiller is involved. This information lets us discuss the equipment being offered and the practical work involved; it is not a request for a performance test.

For the particular site in Leesburg, Virginia: For a shared parking or service area, identify the person who can approve temporary staging and access for loading.

For a 50–99 ton machine, say whether the capacity on the label applies to one self-contained unit or to a larger group. If the rating is unclear, include a model number and an overall photograph instead of estimating.

Condition and equipment history

A chiller does not need to be in a particular operating state before you contact us. We consider working units as well as idle, older, non-operational, and previously disconnected equipment. Mention known damage, missing components, prior modifications, or an incomplete record if you know about them. Uncertainty is acceptable; accuracy about what is known helps everyone evaluate the same machine.

Do not energize equipment, open a refrigerant circuit, or perform troubleshooting just to prepare an offer. If a site review or additional information is useful, we can discuss it with the authorized contact. An inquiry or review does not promise that every unit will receive an offer or be purchased.

How an offer is evaluated

Our review of used 50–99-ton chillers in Leesburg, Virginia considers the equipment identification, configuration, condition, available information, and the work needed to remove and transport it. The model and nominal capacity are useful, but neither a familiar brand nor a stated tonnage is a price quote. An unusual access route, shared connections, or incomplete equipment can change the scope.

We will discuss the equipment included, any information still needed, the proposed price, and the responsibilities for the job. The seller can review the written terms before agreeing. No specific price, acceptance, or removal date is guaranteed before the equipment and project are evaluated.

Disconnects, rigging, crane work, and freight

We handle the agreed equipment disconnects, rigging, crane work when needed, and freight. The method depends on the actual machine and site: a unit may be on a pad, on a roof, or inside a mechanical room. Photos, approximate dimensions, available weight information, and a clear description of the route can help us plan safely.

Identify building rules, access permissions, loading constraints, and nearby systems that must remain in service. We coordinate the work with the authorized site contact and applicable requirements. The seller does not need to hire a separate rigging or freight provider for our agreed removal scope; the precise work and any site-specific conditions should be confirmed in writing.

Outdoor equipment in this range may have a crowded service area, while indoor equipment may have a constrained exit. Describe the actual situation so loading, disconnects, and access can be considered together.

Refrigerant recovery and site coordination

We handle refrigerant recovery as part of the agreed removal work, using appropriately qualified personnel and procedures required for the job. We consider chillers with all refrigerants, including equipment with an unknown refrigerant designation. Tell us what the nameplate or records say, if available; do not open the system or try to recover refrigerant yourself for the inquiry.

Before work begins, identify who has authority to sell the equipment and who controls site access. We can coordinate the agreed disconnect and removal boundaries with the appropriate owner, facility representative, or other authorized party. Existing active services and equipment outside the sale should be identified clearly.

Upfront payment and clear terms

We pay upfront, before the chiller is removed. The proposed purchase amount, payment method and timing, equipment included, and removal responsibilities should be agreed in writing before work begins. An offer depends on the actual equipment and circumstances; we do not quote a universal price based only on a brand, location, tonnage, or refrigerant.

If the chiller is part of a larger replacement or property project, share any sequencing requirements and the relevant points of contact. We will coordinate the plan for the agreed scope, but a schedule is not guaranteed until it has been confirmed for the specific site.

Ready to discuss your used chiller?

Send the details you have for your used 50–99-ton chillers in Leesburg, Virginia: a nameplate or model, photographs, known condition, and the best description of the access route. Let us know what information is unavailable. We will use the information to discuss whether the unit fits a purchase and what an agreed removal would involve.

You are contacting a buyer, not a seller or a listing marketplace. There is no requirement to run a test for us, and we handle the agreed recovery, disconnects, rigging, crane work where needed, and freight after upfront payment. Other brands, types, sizes, and refrigerants are also welcome for review.

Let’s get started

Tell us about
your chiller.

One unit or an entire facility. Operating or decommissioned. Send what you know and we’ll discuss your equipment and removal.

Request a quote

Fields marked * are required
Add more photos (optional)

Prefer to talk? Call or text (614) 715-3047. Form submissions are processed by FormSubmit.

Request a Quote ↗